I use speedfan on all PCs, however on some of them I notice that at lower speeds, speedfan registers 0 RPM for fans that ARE infact moving.
Is there anyway to get the SPEED SETTING (percentage full speed) from Speedfan?
ie.
CPU 1300RPM 50%
I have a few botched fans that don't have the third speed controller cable, but I've attached to the systemboard so speedfan can control the speed, but I can't see a way to get this speed in lcdsmartie.
LCD Smartie official repo is on github
Download the latest version: https://github.com/LCD-Smartie/LCDSmartie/releases
Download the latest version: https://github.com/LCD-Smartie/LCDSmartie/releases
The forums are safe — thanks to your support!A huge thank-you to all who donated — especially Hydrolisk1792. Your contributions are keeping LCD Smartie alive and glowing!
We're still working to fully fund the hosting cost — if you've found LCD Smartie helpful, please consider supporting us on Ko-fi
(Every bit helps — and we deeply appreciate it!)
Speedfan Update
Moderators: _X7JAY7X_, caesar, IFR, mattcro, limbo
-
EvylRat
- Posts: 53
- Joined: September 26th, 2007, 5:33 pm
- Contact:
-
caesar
- Forum Supporter
- Posts: 734
- Joined: October 15th, 2005, 10:39 am
- Location: Romania
- Contact:
-
smartie lover
- Posts: 6
- Joined: July 4th, 2009, 9:54 pm