Hi !
I have problem with my USB/serial Matrix Orbital display.
The connection is ok, but shows only garbage from Smartie.
Seems to be a speed problem but I can't get it to work properly.
It is a 2x20, DevDevil card and works fine with other software.
Are there anybody out there who can help me with this???
BR
Hans
Our new official repo is on github
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
Garbage on my 2x20 LCD
Moderators: _X7JAY7X_, caesar, IFR, mattcro, limbo, Fast351, hydrolisk1792
-
hydrolisk1792
- Site Admin
- Posts: 305
- Joined: July 23rd, 2010, 8:32 pm
- Location: Las Vegas, NV USA
- Contact:
Re: Garbage on my 2x20 LCD
Hello and welcome to the forums. This seems to be a Baud Rate problem. First you need to know the baud rate of the DevDevil board then go into the serial port in your device manager and change that to match the devdevil board. Then do the same thing in smartie. Cheers!