I have an aging M-play Blast, a variant of the LIS VFD, that I just can't let go. I've had very few issues since I switched from the stock software to LCD Smartie, though of course I don't use the thermal or IR functions anymore. I just moved it into a new PC, an Optiplex 7010 with I7-3770 and Windows 10 Home x64. I'm trying to use a my LCD Smartie config (the entire folder) from the previous machine, a HP Elite 800 SFF with Q9500 and Windows 7 Pro x64. It worked after changing the com port to match, but I'm getting an odd character on my $BAR function. [$Bar($HDUsed(D),$HDTotal(D),18)] produces this, any ideas?
Thanks!
Our new official repo is on github
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
Incorrect $BAR character on LIS VFD
Moderators: _X7JAY7X_, caesar, IFR, mattcro, limbo
-
BerMM
- Posts: 4
- Joined: October 18th, 2016, 7:57 pm
Incorrect $BAR character on LIS VFD
You do not have the required permissions to view the files attached to this post.