LCD Smartie official repo is on github
Download the latest version: https://github.com/LCD-Smartie/LCDSmartie/releases
💬 The forums are safe — thanks to your support!
A huge thank-you to all who donated — especially Hydrolisk1792. Your contributions are keeping LCD Smartie alive and glowing!

We're still working to fully fund the hosting cost — if you've found LCD Smartie helpful, please consider supporting us on Ko-fi 💖
(Every bit helps — and we deeply appreciate it!)

Action-Tab->GPO Code?

General discussion about LCD Smartie.

Moderators: _X7JAY7X_, caesar, IFR, mattcro, limbo, Fast351

Post Reply
Daddy-Koehl
Posts: 11
Joined: March 24th, 2005, 9:02 pm
Location: Germany

Action-Tab->GPO Code?

Post by Daddy-Koehl »

i have a question to GPO-Code in the Action-Tab.
What is the GPO-Code doing?

For example: GPO(1,9)
or: GPOToogle(2)

What are they for?
Top
lugiber
Posts: 2
Joined: April 4th, 2005, 2:25 pm
Location: Sweden

Post by lugiber »

GPOs are attatched to matrix orbital displays, so if you don't have one don't worry about this option. The gpos are pins on the back of the display which can be used to get a 5 volt output from the display to light a diode, switch on a relay or turn on a buzzer for instance.

/Peter
Top
Daddy-Koehl
Posts: 11
Joined: March 24th, 2005, 9:02 pm
Location: Germany

Post by Daddy-Koehl »

OK. I understand.

Thanks for your answer.
Top
Post Reply

Return to “Discussion”