Our new official repo is on github
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
LCD only shows first char
Moderators: _X7JAY7X_, caesar, IFR, mattcro, limbo, Fast351
-
VelcroMan
- Posts: 3
- Joined: January 10th, 2008, 5:42 pm
LCD only shows first char
Hi, i have a KS0066-based LCD. It works fine, except for it only shows the first letter. Why does it? Anyone haves any idea?
-
caesar
- Forum Supporter
- Posts: 734
- Joined: October 15th, 2005, 10:39 am
- Location: Romania
- Contact:
Until somebody with more experience answers you this, please try increasing the timing multiplier.
You can do this in Display settings, by changing the Startup parameters.
If you have there LPT1 change that into "LPT1,X" , where X is greater than 1, while increasing that value, keep the smallest one that works for your display.
Hope this helps!
Caesar
You can do this in Display settings, by changing the Startup parameters.
If you have there LPT1 change that into "LPT1,X" , where X is greater than 1, while increasing that value, keep the smallest one that works for your display.
Hope this helps!
Caesar