Hi all, i'm using LCD Smartie for a HD44780 Character LCD,
but it's shows only 2*8 characters and not 2*20 as it should be.
Any suggestions?
Our new official repo is on github
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
Problem showing all characters [HD44780 Character LCD]
Moderators: _X7JAY7X_, caesar, IFR, mattcro, limbo, Fast351
-
SpawNerGR
- Posts: 3
- Joined: December 11th, 2010, 5:40 pm
-
limbo
- Plugin Author
- Posts: 1604
- Joined: February 13th, 2005, 7:38 pm
- Location: Athens - Greece
- Contact:
Re: Problem showing all characters [HD44780 Character LCD]
Can you give more info about driver selection and LCD Smartie configuration?
-
SpawNerGR
- Posts: 3
- Joined: December 11th, 2010, 5:40 pm
Re: Problem showing all characters [HD44780 Character LCD]
Driver is HD44780.dll
LPT1 are the parameters i use
2*20 the selection of my screen.
Tried to play with other settings too, but with no results.
LPT1 are the parameters i use
2*20 the selection of my screen.
Tried to play with other settings too, but with no results.
-
SpawNerGR
- Posts: 3
- Joined: December 11th, 2010, 5:40 pm
Re: Problem showing all characters [HD44780 Character LCD]
Tried to change the LCD but the problem now is that i have a filled line on the top and on the bottom nothing.
Any thoughts?
Any thoughts?
-
limbo
- Plugin Author
- Posts: 1604
- Joined: February 13th, 2005, 7:38 pm
- Location: Athens - Greece
- Contact:
Re: Problem showing all characters [HD44780 Character LCD]
Filled with what? blocks?
this seems to be module's boot screen.
Please check your connection again
this seems to be module's boot screen.
Please check your connection again