LCD Smartie

A driver for Noritake GU140x16G-7000 for serial communication port.

This driver supports:

• 20x2 character display (140x16 dot matrix)
  Brightness control
  Supports 12ms update rate
  Supported baud rates: 9600,38400,19200,115200
  Selectable hardware comm ports

Start up Parameters:
COMx,baud,8,N,1

• COMx: selects which communication port the VFD module is connected.
  baud: Baud rate
  8: bits per byte (fixed at 8 bits)
  N: parity (fixed at no parity)
  1: Stop bits (fixed at 1 bit)

If you do not have a serial communication port, you can use a USB-to-RS-232C converter to connect the VFD module.

If you do not have a supported module, you can find information and purchasing options http://noritake-vfd.com/evaluationkitgu ... -7000.aspx.

If you experience any other problems or have any other concerns, please do not hesitate to contact us at http://v.vfd-itron.com/CU. The more information we have on the problem, the better we are able to help, so please give the version of LCD Smartie, the modification date of the display plugin (from the Properties dialog in Explorer), version of Windows (including 32- or 64-bit, if you can), and the model of VFD you are using.

Hello,

I have a problem, i have a Noritake GU40X16J-7000 vfd screen and i downloaded this plugin. If i use this in lcd smartie the screen is found and also displays characters. But only chinese characters. Could someone please explain to me what i did wrong?


Many Thanks,
Kind Regards,
Sjonnie