Hello,
I am new to the LCD screen deal and got a matrix orbital glk19264 for my PC (running windows 7 64 bit) and and would like to know how to get lcd smartie to work on it. I cant get it to display anything readable. I have the matrxi.dll selected and com3 (which is what the usb has been virtual to per the device manager) and bond rate at 19200 (which is what i set it to). Are there any other settings to get it to work or a new .dll config file need to be used. Anyone get a GLK screen screen to work.
Any help would be appreciated greatly thanks!
Our new official repo is on github
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
glk19264 - how to make it work
Moderators: _X7JAY7X_, caesar, IFR, mattcro, limbo, Fast351
-
limbo
- Plugin Author
- Posts: 1604
- Joined: February 13th, 2005, 7:38 pm
- Location: Athens - Greece
- Contact:
Re: glk19264 - how to make it work
Graphical LCDs like this are not supported (at least) officially by LCD Smartie. 
-
khargy
- Posts: 1
- Joined: January 13th, 2012, 6:42 pm
Re: glk19264 - how to make it work
So do they unofficially work at all? I'm trying to decide between a GLK19264 and a LK204
-
limbo
- Plugin Author
- Posts: 1604
- Joined: February 13th, 2005, 7:38 pm
- Location: Athens - Greece
- Contact:
Re: glk19264 - how to make it work
"unofficially" means coding and debugging knowledge not provided by this forum. I think that Caesar was able to drive graphical LCD's in the past. From my point of view if you intent to use LCD Smartie stay in character based modules.