Hi all,
I have 2 USB interface LCD modules, will anyone how to config them in smarite so that they can work together, what is the different in communication setting in config.ini ?
[Communication Settings]
DisplayDLLName=LCD2USB.dll
DisplayDLLParameters=
Baudrate=8
COMPort=1
USBPalm=0
ParallelPort=888
HDAlternativeAddressing=0
HDKS0073Addressing=0
HDTimingMultiplier=1
MX3USB=0
HTTPProxy=
HTTPProxyPort=0
RemoteHost=localhost
Our new official repo is on github
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
Will anyone know how to connect 2 USB LCD?
Moderators: _X7JAY7X_, caesar, IFR, mattcro, limbo, Fast351, hydrolisk1792
-
whysohurry
- Posts: 2
- Joined: December 20th, 2013, 7:27 am
-
hydrolisk1792
- Site Admin
- Posts: 305
- Joined: July 23rd, 2010, 8:32 pm
- Location: Las Vegas, NV USA
- Contact:
Re: Will anyone know how to connect 2 USB LCD?
I know that you can connect them both to the same computer via usb, if you don't have two more USB ports on your machine, you can get a USB Hub, which extends the amount of ports you can have on one machine. You can run two instances of Smartie with one set to COM1 and the other set to COM2. . . I think that is what you are trying to do, right? 