VFD Driver need for Wincor Nixdorf Ba63

[adu84]

My VFD Futaba M202MD08BA .. Same management protocol : Wincor Nixdorf Ba63 ( 2x20 ) , or BA66 ( 2x40 )

I tried LCDHype
More program and tried : maltepoeggel.de/html/vfd/
VFD work , but I do not like the programs



How to use my LCDSmartie VFD ? because this is my favorite
adu84

[hydrolisk1792]

Hello, Just so you know I deleted the repeat post because one was good enough. Anyway could you supply a bit more information on the display module? If you could supply me with a bit more information on the module I may be able to help you get it working with Smartie. Cheers mate.

[hydrolisk1792]

My VFD Futaba M202MD08BA .. Same management protocol : Wincor Nixdorf Ba63 ( 2x20 ) , or BA66 ( 2x40 )

I tried LCDHype
More program and tried : maltepoeggel.de/html/vfd/
VFD work , but I do not like the programs



How to use my LCDSmartie VFD ? because this is my favorite
adu84

I believe that this is your display?

http://www.wincor-nixdorf.com/internet/ ... nglish.pdf

If so, all the commands are in that document for your display to get it running in Smartie. What you will have to do is either use the test driver in Smartie or contact dperrow for a driver for your display. Let me know how it goes mate.

[dperrow]

Hi,
I'd encourage you to try modifying the test driver for this. You'll get a lot of satisfaction when you get it working.

Happy to help, or create a driver if you are stuck but it takes a little time to debug when I don't have a display.