Our new official repo is on github
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
LCD Smartie version 5.6 is released!
Download it now: https://github.com/LCD-Smartie/LCDSmartie/releases
LCD smartie commands
Moderators: _X7JAY7X_, caesar, IFR, mattcro, limbo, Fast351
-
Mattmax
- Posts: 4
- Joined: April 10th, 2014, 12:37 pm
LCD smartie commands
I'm totally new in using LCD smartie on my PC. So I don't know all the commands and settings. So is there someone a list with all the commands or a how-to for LCD Smartie?
-
Mattmax
- Posts: 4
- Joined: April 10th, 2014, 12:37 pm
Re: LCD smartie commands
Is there nobody, that can give me a clue?
Can I have an action that the LCD change to the temperature display, when the Watertemperature is too high? And chang to the normal routine if everthing is okay?
Can I have an action that the LCD change to the temperature display, when the Watertemperature is too high? And chang to the normal routine if everthing is okay?
-
hydrolisk1792
- Site Admin
- Posts: 305
- Joined: July 23rd, 2010, 8:32 pm
- Location: Las Vegas, NV USA
- Contact:
Re: LCD smartie commands
Okay, this is a bit complicated. Does your display have temperature probes (or plugs for them) on board? If so then you can set this up in the Actions tab of the smartie setup window. There you can set the "IF" and "Then" commands.