LCD Smartie official repo is on github
Download the latest version: https://github.com/LCD-Smartie/LCDSmartie/releases
💬 The forums are safe — thanks to your support!
A huge thank-you to all who donated — especially Hydrolisk1792. Your contributions are keeping LCD Smartie alive and glowing!

We're still working to fully fund the hosting cost — if you've found LCD Smartie helpful, please consider supporting us on Ko-fi 💖
(Every bit helps — and we deeply appreciate it!)

Is there a way to change the debounce time for keypads?

General discussion about LCD Smartie.

Moderators: _X7JAY7X_, caesar, IFR, mattcro, limbo, Fast351

Post Reply
lugiber
Posts: 2
Joined: April 4th, 2005, 2:25 pm
Location: Sweden

Is there a way to change the debounce time for keypads?

Post by lugiber »

I'm trying to get the scroll wheel on my keypad to work with smartie. At the present the scroll wheel generates too short a signal for smartie to recognise it as a push of a button. Is there a way to change this in order to get lcdsmartie to register the use of the scroll wheel? According to the manual this can be done by changing the "debounce time" of the keypad, i just don't know how/if it is possible with lcd smartie.

I am using the lcd smartie-canio release together with a matrix orbital GLK12232-25-SM lcd display on 19200 baud rate.

Any help would be greatly appreciated.

Thanks

/Peter
Top
Post Reply

Return to “Discussion”